I have clad the outside of a shed with 9mm "exterior grade" ply, and battened over the joints to give a board & batten type appearance. after one bit of rain many patches of the ply have started to bubble, see picture for example.. I have built a new shed using 100x50 stud work on 400 centres and i am about the start the cladding stage and this is where i am unsure. my original plan was to 1: staple a breathable membrane on the studs and then fix the cladding onto the studs, then 80mm of celotex on the inside followed by 12mm of ply wood.. Tongue and groove vs overlapping cladding cladding is the exterior of your timber building. there are a variety of different types of cladding, and in this article we will discus two of the most common: tongue and groove weatherboard versus overlapping cladding..
This entry was posted in garden shed, kit set shed, plywood, shed build, garden shed, kit set shed, and tagged cladding, extended roof, garden shed, kit set, plywood, plywood shed, timber shed, wooden shed. bookmark the permalink. ?. We have to admit there has been nothing but great results from our decision to move from oregon timber to plywood cladding for our garden shed panels.. These instructions are for a simple 2.4 x 2.4 m, mono pitch-roofed re-locatable garden shed with plywood exterior cladding, a door and a window and no interior lining. materials.
